From Bike Parts:Park TS-2 Truing Stand with Auto Centering
Was this useful? Yes | No The Park Tool Professional Truing Stand is the stand to choose for heavy shop use. Accepts wheels from 16" to 28" with or without tire removed. Both axle-holding uprights move simultaneously, always centering wheel hub with calipers, regardless of hub width. Calipers and caliper arm are spring-loaded to prevent jamming with badly out-of-true wheels. Made of heavy chrome plated steel with nylon bushings at pivot points. Can be bench-mounted or vise-held. The standard of the industry. For precision work, the TS-2 should be used with the WAG-1 Professional Wheel Alignment Gauge. Opens up to accept hubs 150mm wide.
Was this useful? Yes | No The Park Tool Professional Truing Stand is the stand to choose for heavy shop use. Accepts wheels from 16" to 28" with or without tire removed. Both axle-holding uprights move simultaneously, always centering wheel hub with calipers, regardless of hub width. Calipers and caliper arm are spring-loaded to prevent jamming with badly out-of-true wheels. Made of heavy chrome plated steel with nylon bushings at pivot points. Can be bench-mounted or vise-held. If a forward or backward tilt is desired, use with Truing Stand Tilting Base TSB-2. The most used truing stand in the industry. For precision work, the TS-2 should be used with the WAG-1 Professional Wheel Alignment Gauge. Opens to 150mm wide.
Was this useful? Yes | No 
Have a Question?
Does Spadout sell gear?
