Niterider Angled Multiposition Helmet Mount makes sure that your light beam is angled correctly in the direction that you are riding with two attached nylon straps that clamp securely through the vent holes of your own helmet.
How you attach the mount depends on the pattern and number of vents in your helmet. If your helmet has many vent holes, you should slip both straps through the outer vents. If your helmet has fewer vent holes, slip only one strap down through a vent then bring the strap up through the vent on the opposite side of the helmet. With the mounting plate positioned at your helmets centerline, fasten either one or both of the straps to the clamp or clamps on the edge of the mounting plate. (NOTE: If using only one strap, one strap and one clamp will go unused and are NOT detachable.)
Was this useful? Yes | No 
Have a Question?
Does Spadout sell gear?
Digg this 
Post page to del.icio.us 
StumbleUpon