Anonymous
 |
Hello.
My name is Radu and I would like to ask if on an Elixir R 2009 it is possible to adjust the banjo position, in order the hose with dot 5.1 fluid to follow the frame geometry much precise.
If the adjustment is possible, then there is the possibility the fluid to leak?
Do you have a link to a movie that explains how it's made?
Thank you and i'm waiting for your answer.
|
melissa
 |
|
Anonymous said:
Hello.
My name is Radu and I would like to ask if on an Elixir R 2009 it is possible to adjust the banjo position, in order the hose with dot 5.1 fluid to follow the frame geometry much precise.
If the adjustment is possible, then there is the possibility the fluid to leak?
Do you have a link to a movie that explains how it's made?
Thank you and i'm waiting for your answer. |
Hi Radu,
I am going to forward this on to our Bike Guru, who is working tomorrow. Thanks for your patience!
Melissa
|
ProPeloTom
 | Posted: December 28th, 2010 Edited: December 28th, 2010 | Quote, Reply |
Hey there,
Yes, it is possible. You have 200 degrees of adjustability. It quite simple, a small allen key to loosen the banjo bolt for repositioning of the hose. In most cases you will need to
re-bleed the system. Here is a Tech Manual from SRAM that will show you how its done. Hope this helps.
Tom
|
